Ana səhifə | Məhsullarımız | Nasos və nasos qurğuları | Wilo-CronoLine-IL-E
 Axtar »
Wilo-CronoLine-IL-E

Electronically controlled glanded single pump in in-line design with flange connection and automatic power adjustment

For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Xüsusiyyətlər
  • Reduced life cycle costs due to optimised efficiency
  • Improved functionality
  • Energy savings due to integrated electronic performance control
  • Control mode Δp-c for constant and Δp-v for variable differential pressure at the pump
  • Manual control mode (0–10 V/0–20 mA; 2–10 V/4–20 mA)
  • Volume flow tendency indication
  • Integrated full motor protection (PTC thermistor sensor) with trip electronics
  • Simple operation due to red-button technology, display and infrared interface (IR-Monitoring)
  • Optional interfaces due to retrofit LON or PLR IF-Modules for bus communication
  • Integrated dual pump management
  • High corrosion protection due to cataphoretic coating
  • Can be used flexibly in air-conditioning and cooling systems with application benefits due to the direct draining of condensate via optimised lantern design
  • Long motor life due to standard condensate drainage holes in the motor housings
Wilo-CronoLine-IL-E
Əsas texniki xüsusiyyətlər

  • Permissible temperature range -20°C to +140°C
  • Mains connection 3~400 V, 50 Hz; 3~380 V, 60 Hz
  • Protection class IP 55
  • Nominal diameter DN 40 to DN 80
  • Max. operating pressure 16 bar
Konstruksiya və təsvir
Single-stage, low-pressure centrifugal pump in in-line design with
  • Mechanical seal
  • Flange connection
  • Lantern
  • Coupling
  • Drive with integrated electronic speed control
Materiallar
  • Pump housing and lantern: EN-GJL-250
  • ImpellerStandard version: EN-GJL-200Special version: G-CuSn 10
    • Standard version: EN-GJL-200
    • Special version: G-CuSn 10
  • Shaft: 1.4122
  • Mechanical seal: AQ1EGG; other mechanical seals on request
Təchizin həcmi
  • Pump
  • Installation and operating instructions
Wilo-CronoLine-IL-E
Name Suction size Pressure stage Motor Rated power 
IL-E 80/5-22 DN 80  PN 16 3~ 400 V 7,5 kW 
IL-E 80/5-22 R1 DN 80  PN 16 3~ 400 V 7,5 kW 
IL-E 65/6-24 DN 65  PN 16 3~ 400 V 5,5 kW 
IL-E 65/6-24 R1 DN 65  PN 16 3~ 400 V 5,5 kW 
IL-E 50/10-36 DN 50  PN 16 3~ 400 V 7,5 kW 
IL-E 50/10-36 R1 DN 50  PN 16 3~ 400 V 7,5 kW 
IL-E 40/9-39 DN 40  PN 16 3~ 400 V 5,5 kW 
IL-E 40/9-39 R1 DN 40  PN 16 3~ 400 V 5,5 kW