Ana səhifə | Məhsullarımız | Nasos və nasos qurğuları | Wilo-Comfort-N-Vario COR MVISE.../VR
 Search »
Wilo-Comfort-N-Vario COR MVISE.../VR

Pressure boosting system with 2 to 4 parallel-switched, non-self-priming stainless steel high-pressure multistage centrifugal pumps with speed-controlled glandless pump motors

  • Fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems
  • Pumping of potable water and process water, cooling water, water for fire-fighting or other water mixtures that do not chemically or mechanically attack the materials used and do not contain abrasive or long-fibre constituents
Special features/Product advantages
  • System is virtually noise-free in operation due to 2-4 parallel-switched, glandless stainless steel high-pressure multistage centrifugal pumps with integrated, water-cooled frequency converter
  • Up to 20 dB[A] quieter than conventional systems with comparable hydraulic output
  • Control range of frequency converters from 20 to 50 Hz
  • Operationally reliable through the use of the MVISE pump series with integrated dry-running detection and automatic deactivation in the event of low water
Wilo-Comfort-N-Vario COR MVISE.../VR
Technical data

  • Mains connection 3 ~ 400 V, 50 Hz
  • Fuse A, AC 3 on mains side in conformity with motor power and EVU regulations
  • Fluid temperature max. 50 °C
  • Operating pressure 16 bar
  • Inlet pressure 6 bar
  • Nominal connection diameters R/Rp 2 - DN 80
  • Protection class: IP 44
Equipment
  • 2-4 pumps with glandless pump motors per system
  • Infinitely variable control mode through the use of pumps with integrated frequency converters
  • Components in contact with fluid are corrosion resistant
  • Galvanized base frame with height-adjustable vibration damper for insulation against structure-borne noise
  • Pipework made of 1.4571 stainless steel
  • Gear-operated shut-off ball cock/annular shut-off valve on suction and pressure side of every pump
  • Non-return valve, pressure side
  • Diaphragm pressure vessel 8 l, PN16, pressure side
  • Pressure sensor, discharge side
  • Optional pressure gauge (suction side)
  • Pressure gauge (discharge side)
  • Optional low-water cut-out switchgear
Description/Design
  • Base frame: Galvanized and provided with height-adjustable vibration dampers for comprehensive insulation against structure-borne noise; other versions on request
  • Pipework: Complete pipework made of 1.4571 stainless steel, suitable for connection of all commonly used piping materials; the pipework is sized corresponding to the overall hydraulic performance of the pressure boosting system
  • Pumps: 2 to 4 parallel-switched pumps are used from the series MVISE 2.., 4.., 8..; adapted frequency converters on the pump motor enable infinitely variable control mode for all pumps of these series; all pump components in contact with fluid are made of 1.4301 stainless steel (AISI 304)
  • Fittings: Each pump is fitted on suction and pressure side with DVGW-tested, Ni-coated, CuZn gear-operated shut-off ball fittings or annular shut-off valves and a pressure-side DVGW-approved POM non-return valve in a CuZn housing
  • Diaphragm pressure vessel: 8 l/PN 16 located on the discharge side with a butyl rubber diaphragm, completely safe in accordance with food safety laws; complete with Ni-coated CuZn shut-off ball cock for tests and inspections, with drain and throughflow fitting in accordance with DIN 4807
  • Pressure sensor: 4 to 20 mA, located on the discharge side for activating the central Comfort Vario controller
  • Pressure display: Suction- and discharge-side pressure gauge (ø 63 mm); additional digital display of discharge pressure in the alphanumeric LCD display of the Comfort Vario controller
  • Controller: The system is standard-equipped with a VR Vario controller
Materials
  • Impellers made of 1.4301 stainless steel
  • Stage chambers made of 1.4301 stainless steel
  • Pump housing made of 1.4301 stainless steel
  • Shaft made of 1.4122 stainless steel
  • Seals EPDM (EP851)
  • Housing cover made of 1.4301 stainless steel
  • Housing bottom made of 1.4301 stainless steel
  • Pressure shroud made of 1.4301 stainless steel
  • Bearing made of carbon, synthetic resin-impregnated
  • Pump base FGL 250
Scope of delivery
  • Factory-mounted, connection-ready pressure boosting system checked for functionality and impermeability
  • Packaging
  • Installation and operating instructions
Wilo-Comfort-N-Vario COR MVISE.../VR
Name Suction size Pressure stage Motor Rated power 
COR-4 MVISE 806-2G/VR-EB R3  PN 16 3~ 400 V 2 kW 
COR-4 MVISE 803-2G/VR-EB R3  PN 16 3~ 400 V 1,1 kW 
COR-4 MVISE 410-2G/VR-EB R 2½  PN 16 3~ 400 V 2 kW 
COR-4 MVISE 406-2G/VR-EB R 2½  PN 16 3~ 400 V 1,1 kW 
COR-4 MVISE 404-2G/VR-EB R 2½  PN 16 3~ 400 V 1,1 kW 
COR-4 MVISE 210-2G/VR-EB R 2  PN 16 3~ 400 V 2 kW 
COR-4 MVISE 206-2G/VR-EB R 2  PN 16 3~ 400 V 1,1 kW 
COR-3 MVISE 806-2G/VR-EB R3  PN 16 3~ 400 V 2 kW 
COR-3 MVISE 803-2G/VR-EB R3  PN 16 3~ 400 V 1,1 kW 
COR-3 MVISE 410-2G/VR-EB R 2  PN 16 3~ 400 V 2 kW 
COR-3 MVISE 406-2G/VR-EB R 2  PN 16 3~ 400 V 1,1 kW 
COR-3 MVISE 404-2G/VR-EB R 2  PN 16 3~ 400 V 1,1 kW 
COR-3 MVISE 210-2G/VR-EB R 2  PN 16 3~ 400 V 2 kW 
COR-3 MVISE 206-2G/VR-EB R 2  PN 16 3~ 400 V 1,1 kW 
COR-2 MVISE 806-2G/VR-EB R3  PN 16 3~ 400 V 2 kW 
COR-2 MVISE 803-2G/VR-EB R3  PN 16 3~ 400 V 1,1 kW 
COR-2 MVISE 410-2G/VR-EB R 2  PN 16 3~ 400 V 2 kW 
COR-2 MVISE 406-2G/VR-EB R 2  PN 16 3~ 400 V 1,1 kW 
COR-2 MVISE 404-2G/VR-EB R 2  PN 16 3~ 400 V 1,1 kW 
COR-2 MVISE 210-2G/VR-EB R 2  PN 16 3~ 400 V 2 kW 
COR-2 MVISE 206-2G/VR-EB R 2  PN 16 3~ 400 V 1,1 kW