Ana səhifə | Məhsullarımız | Nasos və nasos qurğuları | Wilo-Drain TS 40-65
 Search »
Wilo-Drain TS 40-65
Installation and Operating Instructions  »

Submersible drainage pump

Wilo Drain TS submersible pumps are well suited for pumping wastewater with foreign substances of max. Ø 10 mm for
  • Domestic and site drainage
  • Environmental and water treatment technology
  • Industrial and process engineering
Special features/Product advantages
  • Inox & composite
  • Detachable connecting cable
  • Wide performance range
  • Internal capacitor (only TS 40)
  • Thermal motor monitoring, residual current monitoring for 3~ pumps, also without switchgear (only with TS 40)
Wilo-Drain TS 40-65
Technical data

  • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Protection class IP 68
  • Submersion depth 5 - 10 m
  • Fluid temperature 3 - 35 °C
  • Cable length 10 m
  • Free ball passage 10 mm
  • Pressure port Rp 1, Rp 1¼, Rp 2½, depending on type
Equipment
  • Ready-to-plug for 1~230V and model A
  • Motor monitoring via temperature
  • Explosion protection, except A-models for TS 50 (only 3~) and TS 65
  • Connecting cable 10 m, detachable
  • Integrated non-return valve for TS 40
  • Hose connection for TS 40
Description/Design
Submersible drainage pump as submersible monobloc unit for vertical wet well installation
  • Low weight
  • Detachable, oil-resistant power supply cable
  • Detachable float switch
  • Corrosion-resistant

Motor:

Three-phase asynchronous motor 3~400 V, 50 Hz or single-phase motor 1~230 V, 50 Hz

Motor protection:
  • Single-phase: Thermal winding contacts (TWC)
  • Three-phase: TS 50, TS 65: Motor protection is to be provided onsite starting with 1.1 kW = thermal winding contact (TWC) TS 40: thermal motor monitoring self-switching

Bearing configuration:

Bearing configuration of the motor shaft in permanently lubricated, low-maintenance roller bearings.

Hydraulics:

Half-open impeller with a ball passage of 10 mm. Installation possible without pedestal. With practical vertical pressure port.

Materials
TS 40:
  • Pump housing PP-GF30
  • Impeller PP-GF30
  • Shaft 1.4404 (AISI 316L) / 1.0402
  • On the motor end: mechanical seal SiC/SiC
  • On the pump side: mechanical seal SiC/SiC
  • Static seal: NBR
  • Motor housing 1.4301 (AISI 304)

TS 50, 65:

  • Pump housing PUR
  • Impeller PUR
  • Shaft 1.4404 (AISI 316L) / 1.0301
  • Rotary shaft seal on motor side: mechanical seal SiC/SiC
  • On the pump side: mechanical seal SiC/SiC
  • Static seal: NBR
  • Motor housing 1.4301 (AISI 304)
Scope of delivery
TS 40, TS 50, TS 65

Pump ready for connection with 10 m connecting cable, equipped if necessary with float switch and plug (model A), hose connection (only TS 40) and installation and operating instructions.

Wilo-Drain TS 40-65
Name Discharge size Motor Speed Rated power 
TS 40/14 A 1~ Rp 1½ 1~ 230 V 2900 1/min 0,75 kW 
TS 40/14 3~ Rp 1½ 3~ 400 V 2900 1/min 0,75 kW 
TS 40/14 1~ Rp 1½ 1~ 230 V 2900 1/min 0,75 kW 
TS 40/10 A 1~ Rp 1½ 1~ 230 V 2900 1/min 0,4 kW 
TS 40/10 3~ Rp 1½ 3~ 400 V 2900 1/min 0,4 kW 
TS 40/10 1~ Rp 1½ 1~ 230 V 2900 1/min 0,4 kW 
TS 65 H 117/22 Rp 2½ 3~ 400 V 2900 1/min 2,2 kW 
TS 50 H 133/22 Rp 2 3~ 400 V 2900 1/min 2,2 kW 
TS 50 H 122/15 Rp 2 3~ 400 V 2900 1/min 1,5 kW 
TS 50 H 111/11 1~ Rp 2 1~ 230 V 2900 1/min 1,1 kW 
TS 50 H 111/11 3~ Rp 2 3~ 400 V 2900 1/min 1,1 kW 
TS 50 H 111/11 A 1~ Rp 2 1~ 230 V 2900 1/min 1,1 kW 
TS 50 H 111/11 A 3~ Rp 2 3~ 400 V 2900 1/min 1,1 kW