Wilo-VeroLine-IP-Z

Glanded circulation pump in in-line design with threaded connection

For pumping potable water, cold and hot water (in accordance with VDI 2035) without abrasive substances, in heating, cold water and cooling water systems
Xüsusiyyətlər
  • High resistance to corrosive media, due to stainless steel housing and Noryl impeller
  • Wide range of applications due to suitability for water with hardness values up to 28°dH
  • All plastic parts that come into contact with the fluid fulfil KTW recommendations
Wilo-VeroLine-IP-Z
Əsas texniki xüsusiyyətlər

  • Permissible temperature rangePotable water up to 28 °dH: max. +65 °C, In short-term operation (2 h) up to +110 °CHeating water: -8 °C to +110 °C
    • Potable water up to 28 °dH: max. +65 °C, In short-term operation (2 h) up to +110 °C
    • Heating water: -8 °C to +110 °C
  • Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz
  • Protection class IP 44 motor, IP 54 terminal box
  • Nominal diameter Rp 1
  • Max. operating pressure 10 bar
Konstruksiya və təsvir
Single-stage, low-pressure centrifugal pump in in-line design with
  • Mechanical seal
  • Threaded connection
  • Motor with one-piece shaft
Materiallar
  • Pump housing and lantern: 1.4306
  • Impeller: Noryl
  • Shaft: 1.4571
  • Mechanical seal: Ceramic/graphite/EPDM
Təchizin həcmi
  • Pump
  • Installation and operating instructions
Wilo-VeroLine-IP-Z
Name Suction size Pressure stage Motor Rated power 
IP-Z 25/6 3~ Rp 1/G 1½  PN 10 3~ 400 V 0,18 kW 
IP-Z 25/6 1~ Rp 1/G 1½  PN 10 1~ 230 V 0,18 kW 
IP-Z 25/2 3~ Rp 1/G 1½  PN 10 3~ 400 V 0,09 kW 
IP-Z 25/2 1~ Rp 1/G 1½  PN 10 1~ 230 V 0,1 kW 
Wilo-VeroLine-IP-Z
Our downloads for the Wilo VeroLine-IP-Z range
The following documents are available for more information:

Download
Wilo-CR-System (6 MB) »
Download
Wilo-C-SK (331 KB) »
Download
Wilo Comfort Controller (CC) System (30 MB) »
Download CAD and data standard
Download
Wilo CAD-Bibliothek (September 2006) (38 MB) »